By . Clamp. At Saturday, September 01st 2018, 05:25:56 AM.
Once the wood is clamped into place, spread wood glue along the seal where the wood will need to connect at a joint. Spread the glue with your finger or a piece of card stock to ensure there is an even distribution and the glue won't cause warping while it cures. Follow the instructions for the glue about curing time, and then you can release the pipe clamps. If using more than one clamp, it is best to incrementally loosen pressure on each clamp as opposed to removing them one by one. If the curing process went smoothly and pressure was distributed correctly, the wood should be firmly connected.
While it is true that gluing the pieces together does the same job of holding the pieces or fastening them together with a clamp, but what happens after you are done working with the piece and you need to detach the pieces? It would not be pleasant or easy to remove the glue and even if you manage to remove them, they might leave behind some sticky and stubborn residue which mars the beauty of the wood. Hence woodworkers appreciate clamps a lot and they understand their importance.
The clamp quality - The materials used in making your clamp will determine the quality and the functionality of the tool. The quality should be good enough to handle your needs and not face any damages if it is accidentally dropped on a surface. Consider the construction material of the clamp before buying.