By . Clamp. At Saturday, September 01st 2018, 02:18:06 AM.
Once the wood is clamped into place, spread wood glue along the seal where the wood will need to connect at a joint. Spread the glue with your finger or a piece of card stock to ensure there is an even distribution and the glue won't cause warping while it cures. Follow the instructions for the glue about curing time, and then you can release the pipe clamps. If using more than one clamp, it is best to incrementally loosen pressure on each clamp as opposed to removing them one by one. If the curing process went smoothly and pressure was distributed correctly, the wood should be firmly connected.
The clamp size - Woodwork projects are not the same and therefore have different requirements. The bench clamps are made in different sizes and it is important to consider the extent of the projects you get so that you can choose a clamp size that won't disappoint with both small and larger projects.
Clamp price - Fact is that the brand, quality, size and materials used to make the bench clamp can determine the price you get to pay in the end. You of course should get the clamp you can afford, but also ensure that you don't end up compromising on its quality in the name of saving money on the tool.